rolec EVO
A socketed smart charger in single-phase 7.4 kW or three-phase 22 kW versions.
UK specification · Last checked
Manufacturer specifications and support information, checked by EV Charger Megastore. We have not tested this charger hands-on. Our editorial standards.
rolec
EVO
A socketed smart charger in single-phase 7.4 kW or three-phase 22 kW versions.
Before you choose
- Power and cable
- 7.4 kW single-phase or 22 kW three-phase · Type 2 socket; separate vehicle cable required. Check the variant.
- Supply
- Internet and controls
- Connections: Wi-Fi and Ethernet; 4G on 22 kW model only. Source
- Solar and home battery
- Installation requirements
- Energy tariff
- Check your car and charger with the energy supplier. Timed charging and supplier-controlled charging have different requirements. Understand tariff compatibility.
Read the full specification and exact model instructions before ordering. Hardware prices exclude installation unless the stated scope says otherwise.
On this page
Manufacturer part numbers
Match the full manufacturer part number (MPN), including its suffix, when comparing prices. A retailer's own stock code can be different. Confirm connectivity and hardware revision for the unit supplied.
| Variant | Manufacturer part number |
|---|---|
| Single-phase 7.4 kW Type 2 socket | ROLEC5011 Source |
| Three-phase 22 kW Type 2 socket | ROLEC5013 Source |
Electrical and charging specifications
| Specification | Detail |
|---|---|
| Single-phase output | Up to 7.4 kW, 32 A Source |
| Three-phase output | Up to 22 kW, 32 A Source |
| Single-phase input | 230 V AC ±10%, 50/60 Hz Source |
| Three-phase input | 400 V AC ±10%, 50/60 Hz Source |
| Charge protocol | Mode 3 Source |
| Phase switching | Three-to-single-phase switching on 22 kW model only Source |
Connection and variants
| Specification | Detail |
|---|---|
| 7.4 kW code | ROLEC5011, single-phase Source |
| 22 kW code | ROLEC5013, three-phase Source |
| Vehicle outlet | Universal Type 2 charging socket Source |
| Vehicle lead | Separate Type 2 lead needed; Rolec lists 5 m and 10 m cable accessories Source |
| User access | Plug and go, app or RFID Source |
| Included RFID cards | Two EVO cards Source |
Housing and environment
| Specification | Detail |
|---|---|
| Dimensions, W × H × D | 260 × 260 × 112 mm Source |
| Enclosure material | PC/ABS alloy; UL94-V0 flammability rating listed Source |
| Heat sink | Aluminium alloy Source |
| Ingress rating | IP54 Source |
| Impact rating | IK10 Source |
| Installation position | Wall mount or optional post Source |
Electrical protection and installation
| Specification | Detail |
|---|---|
| Residual current | Integrated AC 30 mA Type A and DC 6 mA detection with test button Source |
| PME fault detection | Built in; selectable during 22 kW installation Source |
| Load control 7.4 kW | CT clamp and cable included for single-phase model Source |
| Load control 22 kW | Optional three-phase CT kit needed Source |
| Thermal protection | Over-temperature protection listed Source |
| Surge protection | Lightning surge protection listed Source |
Connectivity and control
| Specification | Detail |
|---|---|
| Driver app | Free Rolec EVO app Source |
| Installation app | Rolec CONNECT Source |
| Schedules | Off-peak charging schedules Source |
| Solar | Surplus solar charging available; solar CT accessory listed Source |
| Protocol | OCPP 1.6 Source |
| Connections | Wi-Fi and Ethernet; 4G on 22 kW model only Source |
Warranty and buying checks
| Specification | Detail |
|---|---|
| Warranty | Five years stated by Rolec Source |
| Three-phase prerequisite | 22 kW requires three-phase supply and suitable EV AC charging capability Source |
| Solar kit | Separate ACSR5011 or ACSR5014 accessory, depending on installation Source |
| No public price | No verified exact-code independent in-stock supply-only price is included Source |
Choose the right supply version
Rolec lists ROLEC5011 for the 7.4 kW single-phase EVO and ROLEC5013 for the 22 kW three-phase EVO. Both use a Type 2 socket and need a separate vehicle cable. The 22 kW unit needs a suitable three-phase supply and an EV that can accept that AC rate. Rolec EVO product page.
Check the CT accessories
Rolec says the single-phase package includes a load-balancing CT clamp and cable. The three-phase version requires an optional CT kit; surplus-solar charging uses a separate solar CT accessory. The 22 kW unit’s PME protection is selected during installation. Confirm the correct CT kit and protection configuration with the installer. Rolec EVO product page.
Price scope
No independent, exact-code, in-stock supply-only listing passed this check. Return to the Rolec range.
Manufacturer documents and sources
Specifications apply to the UK models identified above. Follow the instructions for the exact unit supplied; a product summary is not an installation manual.