Charger specificationsNot hands-on tested

Ohme ePod

7.4kW single-phase charging with a Type 2 socket for a removable cable.

UK specification · Last checked

Manufacturer specifications and support information, checked by EV Charger Megastore. We have not tested this charger hands-on. Our editorial standards.

Illustration of the Ohme ePod with closed charging socket lid
Product illustration

Ohme

ePod

7.4kW single-phase charging with a Type 2 socket for a removable cable.

  • 7.4kW
  • Untethered
  • 3yr warranty
  • Intelligent Octopus Go

Before you choose

Power and cable
7.4 kW · Socketed; separate vehicle cable required. Check the variant.
Supply
  • Supply: 230 V AC; single phase. Source
Internet and controls
  • Published cellular model: Multi-network 3G/4G SIM; automatic mobile connection. Source
  • SIM allowance: First 3 years covered by Ohme. Source
  • Other hardware variants: UK Wi-Fi/Bluetooth versions documented separately; confirm supplied SKU. Source
  • Wi-Fi variant radio: 2.4 GHz; IEEE 802.11b/g/n; 20/40 MHz bandwidth; Bluetooth. Source
Solar and home battery
  • Solar prerequisite: Eligible hardware, online charger and working CT clamp. Source
  • Solar modes: Solar Boost; Solar Only where available for the unit and firmware. Source
Installation requirements
  • Upstream protection: Installer must assess upstream RCD and circuit protection; see manual. Source
  • Load balancing: Working CT clamp required. Source
Energy tariff
Documented integrations: Intelligent Octopus Go. Check your car and charger with the energy supplier. Timed charging and supplier-controlled charging have different requirements. Understand tariff compatibility.

Read the full specification and exact model instructions before ordering. Hardware prices exclude installation unless the stated scope says otherwise.

On this page

Manufacturer part numbers

Match the full manufacturer part number (MPN), including its suffix, when comparing prices. A retailer's own stock code can be different. Confirm connectivity and hardware revision for the unit supplied.

VariantManufacturer part number
ePod, Type 2 socket, untetheredOHMEX1GB003-BL Source
Additional UK ePod code, Type 2 socket, untetheredEP0-07GB-WB-BLSTD-01 Source

Electrical and charging specifications

SpecificationDetail
Maximum AC output7.4 kW Source
Maximum current32 A Source
Supply230 V AC; single phase Source
Frequency50 Hz UK supply; data sheet also lists 60 Hz Source
Charging modeMode 3 Source
Vehicle connectionType 2 socket (IEC 62196) Source
Cable optionsSeparate cable required; optional 5 m or 8 m cables Source
Vehicle inletType 1 or Type 2, using the appropriate separate cable Source

Dimensions, construction and environment

SpecificationDetail
Height × width × depth230 × 140 × 100 mm Source
Unit weight1.48 kg on product page; rounded to 1.5 kg in data sheet Source
Ingress ratingIP54 Source
Impact ratingIK08 Source
Operating temperature−25°C to +50°C Source
Storage temperature−40°C to +85°C Source
Operating humidity5–95% RH Source
EnclosurePC945(GG); V-0 UL94 fire rating Source
FinishBlack Source
MountingWall or post; indoor or outdoor Source

Electrical protection and installation

SpecificationDetail
Residual-current protection30 mA Type A characteristic with 6 mA DC detection Source
PEN-fault detectionBuilt in Source
Overcurrent protectionExternal; not included in the charger Source
Upstream protectionInstaller must assess upstream RCD and circuit protection; see manual Source
Supply connectionL + N + E; up to 6 mm² conductors Source
Cable entryRear or underside; 25 mm gland and blanking grommet Source
Load balancingWorking CT clamp required Source

Connectivity, controls and software

SpecificationDetail
Published cellular modelMulti-network 3G/4G SIM; automatic mobile connection Source
SIM allowanceFirst 3 years covered by Ohme Source
Other hardware variantsUK Wi-Fi/Bluetooth versions documented separately; confirm supplied SKU Source
Wi-Fi variant radio2.4 GHz; IEEE 802.11b/g/n; 20/40 MHz bandwidth; Bluetooth Source
Local interfaceThree buttons and status light strip Source
Indicator coloursGreen, blue, yellow, white and purple LED strip Source
AppOhme smartphone app Source
UpdatesOver-the-air firmware/software Source

Smart charging, solar and access

SpecificationDetail
SchedulingCharge targets, ready-by times and routines Source
Direct tariff integrationIntelligent Octopus Go, via linked Ohme account Source
Other tariff schedulesOff-peak scheduling using tariff details and Price Cap settings Source
Solar prerequisiteEligible hardware, online charger and working CT clamp Source
Solar modesSolar Boost; Solar Only where available for the unit and firmware Source
Charge approvalApp approval can be required for each plug-in Source
Local control lockCharger buttons can be disabled in the app Source
Sleep settingLights/display can switch off when inactive Source

Warranty and conformity

SpecificationDetail
Standard warranty3 years Source
Warranty basis36 months from installation; parts and labour, subject to terms Source
Conformity markUKCA Source
Smart-charge-point declarationManufacturer declaration under UK 2021 regulations Source

Supplier price snapshot

MPN: OHMEX1GB003-BL

New ePod 7.4 kW with Type 2 socket. Charger-only prices in GBP, including VAT; separate vehicle cable, delivery and installation excluded. These prices do not apply to other hardware codes.

SupplierPrice inc. VATChecked
Builder Depot£499.00
Electrical4Less£499.20
Lamplec£499.20
LAMPS£497.80
Travis Perkins£515.59

Public product-page prices checked on the dates shown; this is not a live price feed or a checkout quote. Prices and stock can change. Delivery charges and postcode restrictions vary. This is not a whole-market comparison.

Model and cable variants

The ePod is Ohme’s untethered home charger. It has a Type 2 socket instead of a permanently attached vehicle cable. A separate lead must suit the vehicle: Type 2 to Type 2 for a Type 2 inlet, or an appropriate Type 2 to Type 1 lead for a Type 1 inlet. Ohme lists optional 5 m and 8 m cables. The charger rating remains 7.4 kW.

The UK installation guide identifies OHMEX1GB003-BL and EP0-07GB-WB-BLSTD-01. Confirm the supplied hardware and connectivity; a model-family name alone does not establish the radio fitted. UK installation guide, cover.

Connectivity and everyday operation

Ohme’s UK product page advertises the cellular version. Its mobile connection avoids dependence on household Wi-Fi, but still needs usable mobile coverage at the mounting position. The installation guide also includes a separate UK Wi-Fi/Bluetooth variant; those features should not be assumed on every ePod. The data sheet covers SIM costs for the first three years, without establishing a subsequent subscription price. Confirm ongoing connectivity terms before ordering. Product page; data sheet; installation guide.

The app supports charging targets and departure times. Battery-percentage information depends on the vehicle connection: where Ohme cannot retrieve battery status, the app works with the amount of charge to add. That distinction matters when setting a target. Ohme charging controls.

Ohme says an offline charger can fall back to Max Charge at plug-in. This is not the same as connected, tariff-managed charging; do not assume an offline session qualifies for a smart discount. Ohme offline behaviour.

Tariffs and charging controls

Intelligent Octopus Go has a documented Ohme-account integration. The charger needs to be online for smart charging, and Octopus bills the electricity. Account eligibility, settings and tariff terms still apply; this page does not promise a particular electricity rate. Octopus setup and billing guidance.

Timed tariffs can use Ohme’s tariff details and Price Cap controls, but ordinary off-peak scheduling is different from direct integration with a supplier. A restrictive price cap can limit the energy delivered before departure. Ohme Price Cap guidance.

Access controls include approval for each plug-in and disabling the local buttons. These control charging access; they are not a claim of physical cable-theft protection. Ohme security settings.

Solar charging and home load

Solar operation depends on eligible hardware, a working CT clamp and an online charger. Ohme describes eligibility for most complete installations from January 2023 onwards. Solar Boost can supplement solar with grid energy; Solar Only depends on the options available to the individual unit and firmware. Home-battery discharge can also supply the charger, because Ohme cannot distinguish that energy from other household generation. Solar eligibility and modes.

Dynamic load balancing reduces EV charging when household demand approaches the configured limit. The car’s own AC charging limit can also reduce actual power below the charger’s maximum. Ohme load-balancing explanation.

Installation and documentation

Built-in PEN detection and DC residual-current detection do not replace the installer’s assessment of the supply, earthing and upstream protection. The guide specifies a separate overcurrent device and discusses upstream RCD requirements. Use the manual for the exact hardware supplied. Installation guide.

The listed standards and UKCA marking are manufacturer declarations, not independent testing by this site. The data sheet references EN 61851-1, IEC 62955, IEC 62196-1 and EMC standards EN IEC 61000-6-3 and EN IEC 61000-6-1; the linked PDF gives the editions. Historic grant labels in a data sheet do not establish current grant eligibility. Data sheet; smart-charge-point declaration.

See the Ohme Home Pro specifications for the tethered model with a colour screen, or return to the Ohme brand page.

Manufacturer documents and sources

Specifications apply to the UK models identified above. Follow the instructions for the exact unit supplied; a product summary is not an installation manual.

← More Ohme chargers